KIMO Canada Division of CHEVRIER INSTRUMENTS INC. 4850 Gouin Boulevard East Montreal-North, (Quebec) Canada H1G 1A2

With over 20 years experience in designing and manufacturing liquid column manometers, KIMO offers more than 150 standard models for all your differential pressure measurements from 1 Pa up to 2.6 bars. These instruments are both easy to use and offer the reliability of a basic physical measurement.

General technical characteristics
The KIMO liquid column manometers are produced by machining 15 or 20 mm thick PMMA, better known by the trademark Altuglas.

Adjustment
The zero point can be set by adjusting the scale after setting the horizontal position of the manometer, using the integral spirit level.

Accuracy
The accuracy is 2% of the full scale for the inclined models and 1% for the vertical ones at a temperature of 20 °C with a minimum tolerance of 2 scale graduation. Maximum static pressure is 6 bars. Operational range from -30 °C to -60 °C, depending on the liquid used.

Standard equipment
Standard manometers are fitted with two no. 487 connections and are supplied complete with a white PVC wall bracket, manometric fluid, screws and raw plugs.