Kimo Canada : Inclined Manometers and Pressostats

KIMO Canada
Une filiale de
CHEVRIER INSTRUMENTS INC.
4850, boulevard Gouin est, Montréal-Nord
(Québec) Canada H1G 1A2

I N C L I N E DM A N O M E T E R SA N DP R E S S O S T A T S
Manometers
INCLINED LIQUID COLUMN MANOMETERS	Pressure-Vacuum 0-25 mmWC, color scale	CP 25
VERTICAL LIQUID COLUMN MANOMETERS	U-shaped column, ±250 and ±500 mmWC; ±250 to ±500 mmHg	GF Series
INCLINED LIQUID COLUMN MANOMETERS	0-5 to 0-15 mmWC	HP Series
PORTABLE MANOMETERS WITH VERTICAL LIQUID COLUMN	U-shaped column, 0-45 and 0-60 mbar	KM Series
INCLINED LIQUID COLUMN MANOMETERS	±25 and ±40 mmWC	KX Series
VERTICAL LIQUID COLUMN MANOMETERS	U-shaped column, ±50 to ±430 mmWC; ±50 to ±240 mmHg; ±5 to ±310 mbar	LU Series
INCLINED LIQUID COLUMN MANOMETERS	0-20, 50 and 80 mmWC; 0-200, 500 and 800 Pa	MG Series
INCLINED LIQUID COLUMN MANOMETERS	Kit, 0-40 mmWC	MT 40
VERTICAL LIQUID COLUMN MANOMETERS	J-shaped column, 0-100 to 0-2150 mmWC, 0-10 to 0-1550 mbar, 0-350 to 0-1160 mmHg	TJ Series
INCLINED LIQUID COLUMN MANOMETERS	±2.5, 5 and 7.5 mmWC; ±25, 50 and 75 Pa	TX Series
INCLINED LIQUID COLUMN MANOMETERS	Horizontal V column, 0-50 mmWC and 0-500 Pa	VH Series
Pressostats
ELECTRIC CONTACT PRESSURE CONTROLLERS		ECM
DIFFERENTIAL AIR PRESSOSTATS		LGV HC2 / KS HC2
Accessories
Accesories for all Manometers		ACC

With over 30 years experience in designing and manufacturing liquid column manometers, KIMO offers numerous models for all your differential pressure measurements from 1 Pa up to 2.6 bars. These instruments are both easy to use and offer the reliability of a basic physical measurement.

General technical characteristics
The KIMO liquid column manometers are produced by machining 15 or 20 mm thick PMMA, better known by the trademark Altuglas.

Adjustment
The zero point can be set by adjusting the scale after setting the horizontal position of the manometer, using the integral spirit level.

Accuracy
The accuracy is 2% of the full scale for the inclined models and 1% for the vertical ones at a temperature of 20 °C with a minimum tolerance of 2 scale graduation. Maximum static pressure is 6 bars. Operational range from -30 °C to -60 °C, depending on the liquid used.

Standard equipment
Standard manometers are fitted with two no. 487 connections and are supplied complete with a white PVC wall bracket, manometric fluid, screws and raw plugs.

	CP 25 The CP 25 inclined liquid column manometer, developed and manufactured by KIMO measures slight variations in pressure, depression or differential pressure of air or gas. It is specially designed for checking clogging of filters in painting booths. • Graduation scale via coloured zones for fast and easy reading • Safety reservoir enabling momentaneous overshooting of the scale • Supplied with two 487 connectors and a bottle of AWS 10 liquid

	GF Series The GF range of vertical liquid column manometers, developed and manufactured by KIMO, are mainly for checking pressures in gas networks within measurement ranges which vary according to the type of manometric liquid used : VF 1 or MERCURY. • ''U''-shaped column for measuring consecutively positive and negative pressures • Measurement by addition of values read on each column • For fixed and portable use • Zero adjustment by moving the slide strip • Possibility of resisting static pressures over 10 bars • Altuglas column sunk into the solid block • Comes with bottle of liquid, 2 screws and rawplugs

	HP Series The HP range of inclined liquid column manometers, developed and manufactured by KIMO, measure slight variations in pressure, depression or differential pressure of air or gas. They are particularly recommended for measuring overpressures in clean rooms, operating blocks, laboratories, aseptic rooms, laminar flows... • High measurement sensitivity • Very low pressure ranges • Zero adjustment by moving the slide strip • Integrated spirit level for adjusting horizontality • Supplied with a white PVC support, 2 screws and 2 rawlplugs, two 487 connectors and a bottle of AWS 10 liquid

	KM Series The KM vertical liquid column portable manometer, developed and manufactured by KIMO, measures low pressures in gas networks. • Easy to carry • "U"- shaped column for pressure and depression measurement • Direct read-off by moving the gratuated slide strip • Safety valves actuation for momentaneous overshooting of the scale • Fitted with valve connectors and mounting hook • Supplied with connection sleeves, a bottle of VOLT 1S liquid and carrying case

	KX Series The KX range of inclined liquid column manometers, developed and manufactured by KIMO, measure slight variations in pressure, depression or differential pressure of air or gas. They are for use in the following applications: treatment of air, ventilation, air conditioning, heating, dust elimination... • Scale with centered zero • Possibility for measuring positive and negative pressures • Zero adjusting by moving the slide strip • Integrated spirit level for adjusting horizontality. • Supplied with a white PVC support, 2 screws and 2 rawlplugs, two 487 connectors and a bottle of AWS 10 liquid

	LU Series The LU range of vertical liquid column manometers, developed and manufactured by KIMO, are mainly for measuring variations of pressure, depression or differential pressure of air or gas within measurement ranges which vary according to the type of manometric liquid used : AWS 10, VOLT 1S or MERCURY. • ''U''-shaped column for measuring consecutively positive and negative pressures • Measurement by addition of values read on each column • Zero adjustment by moving the slide strip • For fixed use regardless of the manometric liquid used • For portable use with the LU model using VOLT 1S liquid • Supplied with a white PVC support, 2 screws and 2 rawlplugs, two 487 connectors and bottle of liquid

	MG Series The MG range of inclined liquid column manometers, developed and manufactured by KIMO, measure slight variations in pressure, depression or differential pressure of air or gas. They are for use in the following applications: treatment of air, ventilation, air conditioning, heating, dust elimination... • Zero adjustement by moving the slide strip • Safety reservoir enabling momentaneous overshooting of the scale • Integrated spirit level for adjusting horizontality • Supplied with a white PVC support, two screws and two rawplugs, two 487 connectors and a bottle of AWS 10 liquid

	MT 40 The MT range of inclined liquid column portable manometers, developed and manufactured by KIMO, are particulary recommended for those in the heating trade for checking pressures in chimney flues, combustion chambers, filters... • Easy to carry • Safety reservoir enabling momentaneous overshooting of the scale • Zero adjustment by moving the slide strip • Integrated spirit level for adjusting horizontality • Equipped with valve connectors, magnetic fixations, support with base plate • Can be used for measuring speeds with Pitot tube • Supplied with connecting sleeves, bottle of VOLT 1 S liquid and travelling case

	TJ Series The TJ range of vertical liquid column manometers, developed and manufactured by KIMO, are mainly for measuring variations of pressure, depression or differential pressure of air or gas within measurement ranges which vary according to the type of manometric liquid used : AWS 10, VOLT 1S or MERCURY. • "J"- shaped column for direct measuring • Zero adjustment by moving the slide strip • For fixed use regardless of the manometric liquid used • For portable use with the TJ model using VOLT 1S liquid • Supplied with a white PVC support, 2 screws and 2 rawlplugs, two 487 connectors and a bottle of liquid

	TX Series The TX range of inclined liquid column manometers, developed and manufactured by KIMO, measure slight variations in pressure, depression or differential pressure. They are particulary recommended for measuring overpressures and depressions in clean rooms, operating blocks, laboratories, aseptic rooms, laminar flows... • Scale with centered zero • Possibility for measuring positive and negative pressures • High measurement sensitivity • Very low pressure ranges • Zero adjusting by moving the slide strip • Integrated spirit level for adjusting horizontality • Supplied with a white PVC support, 2 screws and 2 rawlplugs, two 487 connectors and a bottle of AWS 10 liquid

	VH Series The VH range of inclined liquid column manometers, developed and manufactured by KIMO, measure slight variations in pressure, depression or differential pressure of air or gas. They are particulary recommended for checking clogging of filters in the ventilation and dust elimination industry. • Horizontale V-shaped liquid column • Dual measuring range • Different sensitivity on the two measuring ranges • Zero adjustment via float • Compact dimensions • Integrated spirit level for adjusting horizontality • Supplied with a white PVC support, 2 screws and 2 rawlplugs, two 487 connectors and a bottle of AWS 10 liquid

Pressostats

	ECM KIMO has designed and manufactured the ECM electric contact pressure controller to combine the inherent reliability and accuracy of the liquid column manometer with electronic switching. The operating principle gives unrivalled preformance when compared to traditional pressure controllers. The KIMO ECM electric contact pressure controllers excel where it is necessary to monitor small variations in low pressures of air or gas and where accurate and reliable monitoring is essential. The ECM is widely used in pharmaceutical laboratories, clean rooms and other area's where good performance is essential. • Positive, negative and differential pressure measurement, with the option of 1, 2 or multiple electric contacts on the same scale • Electric contacts from 0,5 mm H2O (5 Pa) • Delay adjustable from 0 to 45 seconds • Contact rating : 3A at 230 V. - 50 Hz • Operation of the contact on rising or falling pressure, by using the inverter function • Simple pressure setting by cursor on graduated scale • Max. static pressure of 6 bar, when used on differential pressure • Pressure and switching points continuously displayed • Switch position indicated by LED

	LGV HC2 / KS HC2 Les pressostats d'air différentiels à membrane sont utilisés pour la surveillance des installations de traitement d'air. Ils permettent, sans alimentation, d'établir un contact tout ou rien lors du dépassement d'une pression de consigne. Ils peuvent être montés en parallèle avec un manomètre. Ils servent notamment à contrôler les systèmes fonctionnant en dépression ou surpression, les ventilateurs ou encore l'encrassement des filtres. 2 gammes de pressostats d'air différentiels KIMO Pressostats différentiels haute précision LGV HC2 Kit pressostats différentiels haute précision KS HC2 • Pression maximum : 5000 Pa à +85°C. • Tension : 230 Vac, commutation 5A charge résistive. 230 Vac, commutation 0,8A charge inductive cosinus 0,6. • Température ambiante : -30°C à +85°C. • Température du fluide : -30°C à +85°C. • Réglage manuel ou en usine.

Accessoires
	Accessoires